Replacement for Fleetguard HF7313 Hydraulic Filter Element

Micron Rating:
3 micron
overall length:
9.49"
Outside Diameter:
2.87"
Inside Diameter:
1.75"
Operating Pressure:
145 PSID Collapse
Media & Construction:
Cellulose, Single Open End

$29.00

4.8

Direct replacement for Fleetguard HF7313 hydraulic filter in form, fit, and function. Made in America with ISO 9001:2015 Certified manufacturing for assured quality. Optimized filter media is used for fine filtration, long life, and high dirt-holding capacity.

  • 2.87″ OD x 1.75″ ID Top x 9.49″ Length overall
  • 3 Micron per ISO 16889
  • 145 PSID Collapse
  • Replaces Fleetguard HF7313 hydraulic filter in form, fit, and function. Scroll down for additional specs

Free Shipping is available on orders of $500 or more for this product.

LIVE UPS or LTL rates calculated on the checkout page

  • Check offGuaranteed direct replacement – no need for modification
  • Produced in an ISO Certified manufacturing facility for reliability
  • High dirt-holding capacity for longer service life
  • 85% of orders ship within 24 hours – minimize your equipment downtime

SECURE!


Yes. Dimensionally identical to the Fleetguard HF7313 — same OD, length, flow direction, and double open-end configuration. Drops straight in with no modification required.

No. Under the Magnuson-Moss Warranty Act, manufacturers cannot void your warranty simply because you used an aftermarket part. SONA's elements meet or exceed performance criteria — your warranty is protected.

A nominal rating captures roughly 50–90% of particles at the stated size — and varies between manufacturers. An absolute rating means 99.5%+ capture efficiency, verified by ISO 16889 multi-pass testing of the media. This filter is 3 micron.

Yes — independently verified. SONA's 3 micron microglass media is tested to ISO 16889 with a Beta ratio of BX = 200, matching or exceeding performance in both efficiency and dirt-holding capacity.

Change the Fleetguard HF7313 element when differential pressure reaches 25 PSID, or at your OEM service interval — typically every 500–2,000 operating hours depending on system load and contamination levels. Do not wait until the bypass valve activates.

Compatible with petroleum-based hydraulic oils, HH, HL, HM, or HV fluids, and most synthetic lubricants. The Viton seal provides broad chemical compatibility. Confirm with your fluid supplier for non-standard applications. It is not compatible with Skydrol.

SKU: W1153-66263 Category: Tag:

Have a question? Send a note.

Contact

Full Specs

O.D.

2.87"

I.D. Top

1.75"

I.D. Bottom

NA

Length Overall

9.49"

Construction Type

Cellulose, Single Open End

Efficiency

3 micron

Gasket Material

Viton

Wire Support

NA

Max Operating Pressure

145 PSID Collapse

Max Temp

248 Degress F

Weight Each

4

Carton Qty

1

Condition

New