Replacement for Japax JX3 Model EDM Sinker Machine Filters

Q: Will this fit my housing without modification?

Yes. Dimensionally identical to the — same OD, length, flow direction, and double open-end configuration. Drops straight in with no modification required.

Q: Is the filtration performance the same as OEM filters?

Yes — independently verified. SONA's microglass media is tested to ISO 16889 with a Beta ratio of BX = 200, matching or exceeding performance in both efficiency and dirt-holding capacity.

Q: How often should I change my hydraulic filter element?

Change the element when differential pressure reaches 25 PSID, or at your OEM service interval — typically every 500–2,000 operating hours depending on system load and contamination levels. Do not wait until the bypass valve activates.

Micron Rating:
No Information on this Product overall length:
18.0" Outside Diameter:
6.0" Inside Diameter:
2.625" Operating Pressure:
NA Media & Construction:
Cellulose, Double Open End

Price range: $25.50 through $29.00

4.8

Engineered filtration that provides OEM reliability—at an excellent value.

Proudly Made in America, SONA’s direct replacement for the Japax JX3 EDM filter offers trusted performance and engineered quality, all while fitting seamlessly into your existing system.

There is a minimum quantity of six per order, and multiples of six.

Micron Rating

Clear

LIVE UPS or LTL rates calculated on the checkout page

Guaranteed direct replacement – no need for modification
Produced in an ISO Certified manufacturing facility for reliability
High dirt-holding capacity for longer service life
85% of orders ship within 24 hours – minimize your equipment downtime

Replacement for Japax JX3 Model EDM Sinker Machine Filters

Download Product Data Sheet PDF

Will this fit my housing without modification?

Yes. Dimensionally identical to the Japax JX3 — same OD, length, flow direction, and double open-end configuration. Drops straight in with no modification required.

Does using an aftermarket filter void my equipment warranty?

No. Under the Magnuson-Moss Warranty Act, manufacturers cannot void your warranty simply because you used an aftermarket part. SONA's elements meet or exceed performance criteria — your warranty is protected.

What is the difference between absolute (beta rated) and nominal micron rating?

A nominal rating captures roughly 50–90% of particles at the stated size — and varies between manufacturers. An absolute rating means 99.5%+ capture efficiency, verified by ISO 16889 multi-pass testing of the media. This filter is No Information on this Product.

Is the filtration performance the same as OEM filters?

Yes — independently verified. SONA's No Information on this Product microglass media is tested to ISO 16889 with a Beta ratio of BX = 200, matching or exceeding performance in both efficiency and dirt-holding capacity.

How often should I change my hydraulic filter element?

Change the Japax JX3 element when differential pressure reaches 25 PSID, or at your OEM service interval — typically every 500–2,000 operating hours depending on system load and contamination levels. Do not wait until the bypass valve activates.

What hydraulic fluids is this filter compatible with?

Compatible with petroleum-based hydraulic oils, HH, HL, HM, or HV fluids, and most synthetic lubricants. The Viton seal provides broad chemical compatibility. Confirm with your fluid supplier for non-standard applications. It is not compatible with Skydrol.

SKU: T2232 Category: EDM Filters Tags: Japax, Six

Have a question? Send a note.

Full Specs

O.D.	6.0"
I.D. Top	2.625"
I.D. Bottom	2.625"
Length Overall	18.0"
Construction Type	Cellulose, Double Open End
Micron Rating	5 Micron with handle and outer wrap, 10 Micron with handle, 10 Micron with handle and outer wrap, 5 Micron with outer wrap, 10 Micron with outer wrap, 20 Micron with handle and outer wrap, 20 Micron with outer wrap
Gasket Material	Buna
Wire Support	NA
Max Operating Pressure	NA
Max Temp	248 Degress F
Weight Each	4.5
Carton Qty	6
Condition	New