Replacement for Parker PR2758 Hydraulic Filter Element

Micron Rating:
Beta 20 = 200, Beta 26.6 = 1000
overall length:
8.14"
Outside Diameter:
2.00"
Inside Diameter:
0.94"
Operating Pressure:
3045 PSID Collapse
Media & Construction:
Microglass, Single Open End

$81.38

4.8

Engineered filtration that provides OEM reliability—at an excellent value.

Proudly Made in America with ISO certified manufacturing, SONA’s direct replacement for the Parker PR2758 element offers trusted performance and engineered quality, all while fitting seamlessly into your existing system.

Free Shipping is available on orders of $500 or more for this product.

LIVE UPS or LTL rates calculated on the checkout page

  • Check offGuaranteed direct replacement – no need for modification
  • Produced in an ISO Certified manufacturing facility for reliability
  • High dirt-holding capacity for longer service life
  • 85% of orders ship within 24 hours – minimize your equipment downtime

SECURE!


Yes. Dimensionally identical to the Parker PR2758 — same OD, length, flow direction, and double open-end configuration. Drops straight in with no modification required.

No. Under the Magnuson-Moss Warranty Act, manufacturers cannot void your warranty simply because you used an aftermarket part. SONA's elements meet or exceed performance criteria — your warranty is protected.

A nominal rating captures roughly 50–90% of particles at the stated size — and varies between manufacturers. An absolute rating means 99.5%+ capture efficiency, verified by ISO 16889 multi-pass testing of the media. This filter is Beta 20 = 200, Beta 26.6 = 1000.

Yes — independently verified. SONA's Beta 20 = 200, Beta 26.6 = 1000 microglass media is tested to ISO 16889 with a Beta ratio of BX = 200, matching or exceeding performance in both efficiency and dirt-holding capacity.

Change the Parker PR2758 element when differential pressure reaches 25 PSID, or at your OEM service interval — typically every 500–2,000 operating hours depending on system load and contamination levels. Do not wait until the bypass valve activates.

Compatible with petroleum-based hydraulic oils, HH, HL, HM, or HV fluids, and most synthetic lubricants. The Viton seal provides broad chemical compatibility. Confirm with your fluid supplier for non-standard applications. It is not compatible with Skydrol.

SKU: S19347-0058524 Categories: , Tag:

Have a question? Send a note.

Contact

Full Specs

O.D.

2.00"

I.D. Top

0.94"

I.D. Bottom

NA

Length Overall

8.14"

Construction Type

Microglass, Single Open End

Efficiency

Beta 20 = 200, Beta 26.6 = 1000

Gasket Material

Viton

Gasket Type

Internal O-Ring

Wire Mesh Support?

Yes

Change-Out PSID

25 PSID

Max Operating Pressure

3045 PSID Collapse

Max Temp

248 Degress F

Weight Each

3

Carton Qty

1 per carton

Condition

New