Replacement for Schroeder 27KZ1 Hydraulic Filter Element

Micron Rating:
1 Micron; B2 = 200, B3 = 1000
overall length:
27.95"
Outside Diameter:
3.9"
Inside Diameter:
1.65"
Operating Pressure:
145 PSID Collapse
Media & Construction:
Double Open End, Microglass

$77.85

4.8

Direct replacement for Schroeder 27KZ1 hydraulic filter in form, fit, and function. Made in America with ISO 9001:2015 Certified manufacturing for assured quality. Optimized filter media is used for fine filtration, long life, and high dirt-holding capacity.

  • 3.9″ OD x 1.65″ ID Top x 27.95″ Length overall
  • 1 Micron; B2 = 200, B3 = 1000 per ISO 16889
  • 145 PSID Collapse
  • Replaces Schroeder 27KZ1 hydraulic filter in form, fit, and function. Scroll down for additional specs

Free Shipping is available on orders of $500 or more for this product.

LIVE UPS or LTL rates calculated on the checkout page

  • Check offGuaranteed direct replacement – no need for modification
  • Produced in an ISO Certified manufacturing facility for reliability
  • High dirt-holding capacity for longer service life
  • 85% of orders ship within 24 hours – minimize your equipment downtime

SECURE!


Yes. Dimensionally identical to the Schroeder 27KZ1 — same OD, length, flow direction, and double open-end configuration. Drops straight in with no modification required.

No. Under the Magnuson-Moss Warranty Act, manufacturers cannot void your warranty simply because you used an aftermarket part. SONA's elements meet or exceed performance criteria — your warranty is protected.

A nominal rating captures roughly 50–90% of particles at the stated size — and varies between manufacturers. An absolute rating means 99.5%+ capture efficiency, verified by ISO 16889 multi-pass testing of the media. This filter is 1 Micron; B2 = 200, B3 = 1000.

Yes — independently verified. SONA's 1 Micron; B2 = 200, B3 = 1000 microglass media is tested to ISO 16889 with a Beta ratio of BX = 200, matching or exceeding performance in both efficiency and dirt-holding capacity.

Change the Schroeder 27KZ1 element when differential pressure reaches 25 PSID, or at your OEM service interval — typically every 500–2,000 operating hours depending on system load and contamination levels. Do not wait until the bypass valve activates.

Compatible with petroleum-based hydraulic oils, HH, HL, HM, or HV fluids, and most synthetic lubricants. The Viton seal provides broad chemical compatibility. Confirm with your fluid supplier for non-standard applications. It is not compatible with Skydrol.

SKU: H5968-59538 Categories: , Tag:

Have a question? Send a note.

Contact

Full Specs

O.D.

3.9"

I.D. Top

1.65"

I.D. Bottom

1.65"

Length Overall

27.95"

Construction Type

Double Open End, Microglass

Efficiency

1 Micron; B2 = 200, B3 = 1000

Gasket Material

Viton

Wire Support

Yes

Max Operating Pressure

145 PSID Collapse

Max Temp

248 Degress F

Weight Each

6

Carton Qty

1

Condition

New