Replacement for Taisei Kogyo PLND-06-10U Filter Element

Micron Rating:
10 micron
overall length:
4.1"
Outside Diameter:
2.45"
Inside Diameter:
1.29"
Operating Pressure:
No Information on this Product
Media & Construction:
No Information on this Product

$49.21

4.8

Engineered filtration that provides OEM reliability—at an excellent value.

Proudly Made in America with ISO certified manufacturing, SONA’s direct replacement for the Taisei Kogyo PLND-06-10U element offers trusted performance and engineered quality, all while fitting seamlessly into your existing system.

Free Shipping is available on orders of $500 or more for this product.

LIVE UPS or LTL rates calculated on the checkout page

  • Check offGuaranteed direct replacement – no need for modification
  • Produced in an ISO Certified manufacturing facility for reliability
  • High dirt-holding capacity for longer service life
  • 85% of orders ship within 24 hours – minimize your equipment downtime

SECURE!


Yes. Dimensionally identical to the Taisei Kogyo PLND-06-10U — same OD, length, flow direction, and double open-end configuration. Drops straight in with no modification required.

No. Under the Magnuson-Moss Warranty Act, manufacturers cannot void your warranty simply because you used an aftermarket part. SONA's elements meet or exceed performance criteria — your warranty is protected.

A nominal rating captures roughly 50–90% of particles at the stated size — and varies between manufacturers. An absolute rating means 99.5%+ capture efficiency, verified by ISO 16889 multi-pass testing of the media. This filter is 10 micron.

Yes — independently verified. SONA's 10 micron microglass media is tested to ISO 16889 with a Beta ratio of BX = 200, matching or exceeding performance in both efficiency and dirt-holding capacity.

Change the Taisei Kogyo PLND-06-10U element when differential pressure reaches 25 PSID, or at your OEM service interval — typically every 500–2,000 operating hours depending on system load and contamination levels. Do not wait until the bypass valve activates.

Compatible with petroleum-based hydraulic oils, HH, HL, HM, or HV fluids, and most synthetic lubricants. The Viton seal provides broad chemical compatibility. Confirm with your fluid supplier for non-standard applications. It is not compatible with Skydrol.

SKU: T1259-329900 Categories: , Tag:

Have a question? Send a note.

Contact

Full Specs

O.D.

2.45"

I.D. Top

1.29"

I.D. Bottom

NA

Length Overall

4.1"

Efficiency

10 micron

Max Temp

248 Degress F

Weight Each

4

Carton Qty

1

Condition

New