Replacement for Wix D41A10CAV Hydraulic Filter Element

Micron Rating:
10 micron
overall length:
3.39"
Outside Diameter:
1.77"
Inside Diameter:
1.00"
Operating Pressure:
305 PSID Collapse
Media & Construction:
Cellulose, Single Open End

$19.95

4.8

Direct replacement for Wix D41A10CAV hydraulic filter in form, fit, and function. Made in America with ISO 9001:2015 Certified manufacturing for assured quality. Optimized filter media is used for fine filtration, long life, and high dirt-holding capacity.

  • 1.77″ OD x 1.00″ ID Top x 3.39″ Length overall
  • 10 Micron per ISO 16889
  • 305 PSID Collapse
  • Replaces Wix D41A10CAV hydraulic filter in form, fit, and function. Scroll down for additional specs

Free Shipping is available on orders of $500 or more for this product.

There is a minimum quantity of six per order, and multiples of six.

LIVE UPS or LTL rates calculated on the checkout page

  • Check offGuaranteed direct replacement – no need for modification
  • Produced in an ISO Certified manufacturing facility for reliability
  • High dirt-holding capacity for longer service life
  • 85% of orders ship within 24 hours – minimize your equipment downtime

SECURE!


Yes. Dimensionally identical to the Wix D41A10CAV — same OD, length, flow direction, and double open-end configuration. Drops straight in with no modification required.

No. Under the Magnuson-Moss Warranty Act, manufacturers cannot void your warranty simply because you used an aftermarket part. SONA's elements meet or exceed performance criteria — your warranty is protected.

A nominal rating captures roughly 50–90% of particles at the stated size — and varies between manufacturers. An absolute rating means 99.5%+ capture efficiency, verified by ISO 16889 multi-pass testing of the media. This filter is 10 micron.

Yes — independently verified. SONA's 10 micron microglass media is tested to ISO 16889 with a Beta ratio of BX = 200, matching or exceeding performance in both efficiency and dirt-holding capacity.

Change the Wix D41A10CAV element when differential pressure reaches 25 PSID, or at your OEM service interval — typically every 500–2,000 operating hours depending on system load and contamination levels. Do not wait until the bypass valve activates.

Compatible with petroleum-based hydraulic oils, HH, HL, HM, or HV fluids, and most synthetic lubricants. The Viton seal provides broad chemical compatibility. Confirm with your fluid supplier for non-standard applications. It is not compatible with Skydrol.

SKU: W1322-58346 Category: Tags: ,

Have a question? Send a note.

Contact

Full Specs

O.D.

1.77"

I.D. Top

1.00"

I.D. Bottom

NA

Length Overall

3.39"

Construction Type

Cellulose, Single Open End

Efficiency

10 micron

Gasket Material

Viton

Wire Support

NA

Max Operating Pressure

305 PSID Collapse

Max Temp

248 Degress F

Weight Each

1.5

Carton Qty

1

Condition

New