Wix R16C10CB Hydraulic Filter Replacement

Micron Rating:
10 micron
overall length:
2.95"
Outside Diameter:
2.05"
Inside Diameter:
0.97"
Operating Pressure:
44 PSID Collapse
Media & Construction:
24.7 PSID Bypass Valve, Cellulose Media

$22.15

4.8

Engineered filtration that provides OEM reliability—at an excellent value.

Proudly Made in America with ISO certified manufacturing, SONA’s direct replacement for the Wix R16C10CB element offers trusted performance and engineered quality, all while fitting seamlessly into your existing system.

Free Shipping is available on orders of $500 or more for this product.

There is a minimum quantity of six per order, and multiples of six.

LIVE UPS or LTL rates calculated on the checkout page

  • Check offGuaranteed direct replacement – no need for modification
  • Produced in an ISO Certified manufacturing facility for reliability
  • High dirt-holding capacity for longer service life
  • 85% of orders ship within 24 hours – minimize your equipment downtime

SECURE!


Yes. Dimensionally identical to the Wix R16C10CB — same OD, length, flow direction, and double open-end configuration. Drops straight in with no modification required.

No. Under the Magnuson-Moss Warranty Act, manufacturers cannot void your warranty simply because you used an aftermarket part. SONA's elements meet or exceed performance criteria — your warranty is protected.

A nominal rating captures roughly 50–90% of particles at the stated size — and varies between manufacturers. An absolute rating means 99.5%+ capture efficiency, verified by ISO 16889 multi-pass testing of the media. This filter is 10 micron.

Yes — independently verified. SONA's 10 micron microglass media is tested to ISO 16889 with a Beta ratio of BX = 200, matching or exceeding performance in both efficiency and dirt-holding capacity.

Change the Wix R16C10CB element when differential pressure reaches 25 PSID, or at your OEM service interval — typically every 500–2,000 operating hours depending on system load and contamination levels. Do not wait until the bypass valve activates.

Compatible with petroleum-based hydraulic oils, HH, HL, HM, or HV fluids, and most synthetic lubricants. The Viton seal provides broad chemical compatibility. Confirm with your fluid supplier for non-standard applications. It is not compatible with Skydrol.

SKU: W5020-62257 Categories: , Tags: ,

Have a question? Send a note.

Contact

Full Specs

O.D.

2.05"

I.D. Top

0.97"

I.D. Bottom

24.7 PSID Bypass Valve

Length Overall

2.95"

Construction Type

24.7 PSID Bypass Valve, Cellulose Media

Efficiency

10 micron

Gasket Material

Viton

Wire Support

NA

Max Operating Pressure

44 PSID Collapse

Max Temp

248 Degrees F

Weight Each

1.25

Carton Qty

1

Condition

New